Physical test methods / Strength properties and deformation behavior / Tear tests Double edge tear

Double Edge Tear Testing of Leather and Flexible Materials

Our laboratory determines the tear resistance of flexible materials using the double edge tear principle. The specimen is prepared with two opposing cuts or defined initial tears. This concentrates the tensile load on a limited remaining section of the material.

As the load increases, tearing progresses from the prepared edges into the material. The force required to propagate the tear or continue tearing the specimen is measured. The specimen geometry differs significantly from the single edge tear method and produces a different stress distribution around the tear tips.

The method is particularly relevant for leather, artificial leather, coated materials and other flexible sheet materials. In leather, fibre structure, sampling direction and thickness can influence the result; in coated materials, the coating and layer adhesion can also affect tear propagation.

The Double Edge Tear is part of the Tear Tests. Further mechanical and physical material tests are listed in our overview of Physical Testing.

Below you will find the available tests based on the double edge tear principle.


Filter


Filter


Apply filter

Contact

FILK Freiberg Institute gGmbH
Meißner Ring 1-5
09599 Freiberg

GERMANY

Fon: +49-(0)3731-366-0
Fax: +49-(0)3731-366-130
E-Mail: mailbox@filkfreiberg.de