Testing acc. to DIN 53350: Testing of plastics films and coated textile fabrics, manufactured using plastics; determination of stiffness in bending, method according to Ohlsen
Material
Industry
Publisher
Testing methods
Our test laboratory performs testing in accordance with DIN 53350 using an accredited procedure. The standard specifies a method for determining the bending stiffness of plastic films and sheeting using the two-point bending method (Ohlsen approach). The test measures the resistance of a specimen clamped at one end to a defined bending load and provides information about the stiffness and flexibility of plastic and coated sheet materials.
Bending stiffness is an important mechanical characteristic of flexible materials. It describes resistance to elastic bending deformation and depends on material composition, thickness and layer structure. DIN 53350 provides a standardised method for evaluating bending behaviour. For homogeneous plastic films, the flexural modulus can also be determined.
Applications
The test method is suitable for plastic films, flexible plastic sheeting, plastics-coated textile fabrics and artificial leather.
Bending stiffness testing is particularly relevant for automotive interior materials, upholstery fabrics, coated textiles, plastic films and flexible composites. Bending stiffness influences material flexibility, handling and appearance during processing and use.
The test supports material development, quality assurance and comparative evaluation of different material formulations and multilayer structures. Changes in bending stiffness resulting from manufacturing and processing can also be investigated.
Test Procedure According to DIN 53350
Strip-shaped specimens with a width of (20 ± 0.1) mm are prepared. Their length depends on the testing apparatus; the classical Ohlsen method uses specimens measuring 100 mm in length.
Unless otherwise agreed, five specimens are prepared parallel and five perpendicular to the production direction. After preconditioning, their thickness is determined using the appropriate test method.
The specimen is clamped at one end and bent by a defined rotational movement. The standard permits either direct continuous measurement of bending force or indirect determination of bending moment using the classical Ohlsen approach.
The angular speed is 1.5°/s. Bending length and angle are selected to ensure deformation remains within the linear-elastic range. For plastic films, a bending length of 10 mm and an angle of 10° are suitable examples.
Bending stiffness is calculated from the measured force or moment and expressed in N·mm². For homogeneous films, the flexural modulus can additionally be determined in N/mm².
Results are evaluated separately for both material directions. As the measurement principles are not fully comparable, the method and test conditions must be considered when interpreting the results.
Related Tests
DIN EN ISO 22751 – Determination of Bending Properties of Rubber- or Plastics-Coated Fabrics describes another method for evaluating bending force and bending behaviour of coated textiles. DIN 53121 – Determination of Bending Stiffness by the Beam Method provides methods for determining width-related bending stiffness using two-point, three-point or four-point bending tests. DIN 53362 – Determination of Bending Stiffness Using the Cantilever Method specifies an alternative method for characterising flexible plastic films and textile fabrics. For automotive interior materials, FILK also offers VDA 230-209 – Determination of Resistance to Bending.
Further methods for evaluating bending stiffness and deformation behaviour can be found in our specialist category Bending Tests and the subcategory 2-Point Bending Test.
An overview of additional testing methods is available in our Overview of Physical Testing. Further standards, specifications and testing services can be explored using the search function in our Accredited Test Laboratory Service Overview.
