ISO 5397 Leather: Hide Substance (accredited)

Testing acc. to ISO 5397: Leather; Determination of nitrogen content and "hide substance"; Titrimetric method

Our test laboratory performs testing according to ISO 5397 using an accredited method to determine the nitrogen content and the calculated hide substance content of leather. The Kjeldahl method is used to chemically digest the nitrogen-containing constituents of the material, followed by distillation and titration. The hide substance content is then calculated from the measured nitrogen content using a defined conversion factor.

The method is suitable for different types of leather and tanning processes as well as for the chemical characterisation of collagen-containing materials. Hide substance represents an approximate measure of the protein-based material originating from animal hide. Since collagen is the main structural component of hide, the examination provides important information about the composition and quality of leather and collagen-based materials.

Test Procedure According to ISO 5397

During testing, a prepared and homogenised leather specimen is digested with sulphuric acid and a suitable catalyst using the Kjeldahl method. The organically bound nitrogen is converted into ammonium compounds. After adding an alkaline solution, the liberated ammonia is separated by distillation and collected in a suitable receiving solution.

Quantitative determination is carried out by titration. The consumption of the standard solution is used to calculate the nitrogen content of the specimen, expressed as a percentage by mass. The hide substance content is subsequently determined by multiplying the nitrogen content by the conversion factor of 5.62 specified in the standard.

Since other nitrogen-containing constituents may also contribute to the analytical result, the calculated hide substance content should be regarded as a conventional material parameter. Additional investigations may be useful for a more detailed assessment of materials containing nitrogen-bearing processing additives or synthetic tanning agents.

Applications of the Test

Testing according to ISO 5397 enables the quantitative assessment of nitrogen and hide substance content in different leather qualities. Differences in raw material composition, tanning, finishing and processing can influence the chemical composition of the material and can be characterised by this test.

Typical applications include chemical quality control of leather, verification of material formulations and characterisation of collagen and collagen-containing raw materials. The measured parameters support comparison of production batches, process monitoring and the development of new materials.

Nitrogen and hide substance determination can also provide useful supplementary information for investigating collagen-based materials intended for technical and medical applications. However, the method does not directly determine pure collagen content or identify the origin of individual proteins.

Related Tests

For a more detailed investigation of nitrogen-containing components in leather, FILK offers testing according to DIN 53308. This method covers the determination of total nitrogen and ammonium salt content as well as the calculation of hide substance.

For additional characterisation of collagen and collagen-containing products, FILK performs accredited photometric determination of hydroxyproline content according to FILK-QMA-2003. While ISO 5397 uses nitrogen content to calculate hide substance, hydroxyproline determination provides a more collagen-specific analytical approach.

For special investigations of nitrogen composition, FILK also offers accredited acidimetric determination of amide nitrogen content in collagen-containing products according to FILK-QMA-2013. Further test methods are summarised in the Nitrogen section.

Further information on our chemical testing methods for leather and collagen-containing materials is available in the Collagen/Leather section. A comprehensive overview of our analytical methods is provided in the Chemical Analysis section. Our complete range of testing services can be found in the Accredited Test Laboratory overview.



Inquiry to Test Laboratory

Contact

FILK Freiberg Institute gGmbH
Meißner Ring 1-5
09599 Freiberg

GERMANY

Fon: +49-(0)3731-366-0
Fax: +49-(0)3731-366-130
E-Mail: mailbox@filkfreiberg.de