Testing acc. to Volkswagen PV 1306: Non-Metallic Materials Exposure Test for Determining the Tackiness of Polypropylene Parts
Material
Industry
Publisher
Testing categories
Our test laboratory performs testing according to Volkswagen PV 1306 to determine the stickiness of PP plastics. The method assesses whether polypropylene materials develop sticky or otherwise altered surfaces as a result of intensive light and heat exposure.
The test uses defined dry exposure to filtered xenon arc radiation and is particularly intended for non-metallic plastic materials used in automotive applications. The development of surface stickiness is evaluated during artificial ageing.
Applications
PV 1306 is particularly suitable for PP plastics and surfaces or components made from polypropylene for automotive applications. The test can be used for material development, material approval, quality control and comparison of different PP formulations, additive systems or production batches.
The test helps identify undesirable surface changes caused by light and heat ageing. In addition to stickiness, changes such as dull or wax-like surfaces, resinification or cracking can also be identified.
Testing according to PV 1306
PP specimens are exposed in a xenon arc apparatus under defined dry exposure conditions without water spray. The specimens undergo continuous exposure over several cycles. Specimen geometry and thickness are adapted to the exposure equipment and the relevant component configuration.
Stickiness is generally assessed on the reverse side of the specimen or on non-grained surfaces. Evaluation is performed immediately after removal from the exposure apparatus while the specimens are still warm.
The surfaces are classified according to a defined rating system for stickiness and characteristic surface changes. In addition to different degrees of stickiness, PV 1306 also distinguishes dull, resinified and wax-like surfaces and provides for termination of the test if cracking occurs.
Related tests
A closely related Volkswagen method is the accredited PV 1303 – Exposure test for passenger compartment components. It is used for the general assessment of non-metallic automotive interior materials under artificial light exposure.
For combined exposure to artificial light and elevated temperature, FILK also offers the accredited DIN EN ISO 105-B06 – Colour fastness and ageing to artificial light at high temperatures.
A wide range of Volkswagen-specific test methods available at FILK can be found in our overview of testing according to VW/Volkswagen specifications; further standards, specifications and test services can be explored via the FILK accredited test laboratory and central test-service search. For material and technology-related problems in automotive interiors, FILK also provides failure analysis and defect diagnostics to systematically identify possible causes.
