Volvo VCS 1027,2749 VOC Emission

Testíng acc. to VCS 1027,2749: Determination of organic emissions from nonmetallic materials in vehicle interiors

Our test laboratory performs testing according to Volvo VCS 1027,2749 for the determination of organic emissions from non-metallic materials used in vehicle interiors. The method is particularly suitable for assessing total organic emissions and enables the emission potential of different materials and components used in automotive interiors to be compared. The test therefore supports material development, material selection, approval procedures and quality assurance.

The test belongs to the field of Emissions + Odour. The core of the method is a total carbon analysis using static headspace GC-FID. Optionally, an additional evaluation using an MS detector can be performed, enabling the identification of critically listed or otherwise relevant organic substances. The assessment of total organic emissions can therefore be supplemented, if required, by information on selected individual compounds.

Classification and related test methods

VCS 1027,2749 corresponds in its technical content to VDA 277 and is a further development of the former Volvo STD 1027,2714, Issue 1. Both methods belong to the established headspace methods used to assess organic emissions from non-metallic materials in vehicle interiors.

There is a particularly close relationship with Volvo VCS 1027,2759. While VCS 1027,2749 focuses on total organic emissions, VCS 1027,2759 extends the analysis to the quantitative determination of specific volatile organic compounds. Further characterisation of automotive emissions can also be carried out according to VDA 278; however, this method is based on a different analytical principle. Additional analytical options are available in the field of Chemical Analysis.

Test procedure according to Volvo VCS 1027,2749

The material sample is placed in a gas-tight headspace vial and conditioned under the conditions specified in the Volvo standard. Organic compounds released from the material are subsequently analysed by static headspace gas chromatography.

Total carbon analysis is performed using GC-FID. The chromatographic signal is used to determine the total organic emission of the material under investigation. Optionally, an MS detector can additionally be used to identify relevant or critically listed individual compounds. In this way, the test enables both a comparative assessment of the overall emission potential and, where required, a more detailed evaluation of selected organic substances.

Further tests according to specifications issued by Volvo can be found on our Volvo page. An overview of Volvo and other manufacturers, associations and standardisation organisations is available under Tests by publisher.



Inquiry to Test Laboratory

Contact

FILK Freiberg Institute gGmbH
Meißner Ring 1-5
09599 Freiberg

GERMANY

Fon: +49-(0)3731-366-0
Fax: +49-(0)3731-366-130
E-Mail: mailbox@filkfreiberg.de